• 花季传媒下载,花季传媒网站入口,花季传媒旧版APP下载,花季传媒免费网站入口免下载

    谘詢電話

    18368392212

    當前位置:首頁   >  產品中心  >  乳化機係列  >  超級微納米乳化機  >  GDG20B型超級微納米乳化機

    GDG20B型超級微納米乳化機

    簡要描述:GDG20B型超級微納米乳化機
    該設備是由電機、底座、傳動、密封、均質器、流量泵、壓力保護裝置、冷卻、加熱裝置、控製單元等組成。物料從設備上口進入,經九級高速剪切,從下而上從上口排出。是GDG20A型的細分,定子和轉子極小的配合間隙,在轉子超速運行時產生粒子團微粒化,定子麵靜止,在強大的速差下,轉子高速旋轉,從而形成0.1-0.5um的薄膜,對粒徑進行切割、剝離、分層,對物料進行乳化、分散、切割等

    • 產品型號:
    • 廠商性質:生產廠家
    • 更新時間:2024-06-13
    • 訪  問  量:458

    詳細介紹

        GDG20B型超級微納米乳化機

    設備介紹

    該設備是由電機、底座、傳動、密封、均質器、流量泵、壓力保護裝置、冷卻、加熱裝置、控製單元等組成。物料從設備上口進入,經九級高速剪切,從下而上從上口排出。是GDG20A型的細分,定子和轉子極小的配合間隙,在轉子超速運行時產生粒子團微粒化,定子麵靜止,在強大的速差下,轉子高速旋轉,從而形成0.1-0.5um的薄膜,對粒徑進行切割、剝離、分層,對物料進行乳化、分散、切割等作用。

    1、具有對腔室內剪切的物料進行在線保溫和加熱功能,確保物料不會過熱或過冷,滿足各種工藝要求。

    2、雙端麵機械密封自帶水循環冷卻和安全保護裝置,具有壓力示警保護功能,壓力值低於安全壓力時聲光報警,高速旋轉時密封更加可靠。3、采用五軸數控精密加工,保障了形位公差和尺寸公差的合格率,確保剪切定子、轉子配合間隙僅為0.15mm高速下運行順暢。高速運行的軸承溫控裝置,保證了8000r/min下長時間持續工作。

    4、特殊材料保障主軸在高速運行時不會發生形變,線速度50m/s,跳動在0.05mm以內。

    5、強大的剪切力、精密配合、穩定輸出的組合下,物料粒徑可達0.2-1um。

    6、具有自循環清洗功能,滿足GMP要求。

     

    Equipment introduction

    The equipment is composed of motor, base, drive, seal, homogenizer, flowpump, pressure protection device, cooling, heating device, control unit, etc.The material enters from the upper mouth of the equipment, goes throughnine high-speed shear, from the bottom up, and is discharged from theupper mouth. lt is the subdivision of GDG20A type, the stator and the rotorare very small with the gap, the particle agglomeration is granular when therotor is running at excessive speed, the stator surface is stationary, and therotor is rotating at high speed under the strong speed difference, thusforming a 0.1-0.5um film, cutting, stripping, delamination of the particle size,emulsifying, dispersing and cutting the material.

    1,lt has the function of online insulation and heating for the materials cut inthe chamber to ensure that the materials will not be overheated orundercooled to meet various process requirements.

    2,double-end mechanical seal with water circulation cooling and safetyprotection device, with pressure warning protection function, the pressurevalsue is lower than the safety pressure sound and light alarm, high-speedrotation sealing is more reliable.

     

    3, the use of five-axis CNC precision machining, to ensure the form andposition tolerance and dimensional tolerance of the pass rate, to ensure thatthe shear stator, rotor clearance is only 0.15mm high speed runningsmoothly. The high-speed bearing temperature control device ensures long.term continuous operation at 8000r/min.

    4, the special material to ensure that the spindle at high speed operation willnot occur deformation, linear speed 50m/s, beating within 0.05mm.5. Under the combination of strong shear force, precise fit and stable output.the material particle size can reach 0.2-lum.6, with self-circulation cleaning function, to meet the GMP requirements.

    GDG20B型超級微納米乳化機

     

     

     

    產品谘詢

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯係電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7
    掃碼谘詢

    傳真:0573-89101029

    郵箱:gdxsnq@goodym.net

    地址:浙江嘉善經濟技術開發區

    版權所有©2024 浙江花季传媒下载機械科技有限公司 All Rights Reserved    備案號:浙ICP備85815228號-3    sitemap.xml    管理登陸    技術支持:製藥網     總訪問量:359675
    網站地圖